HFVT Products: Parrot Car Kits > Bluetooth CK3100 LCD
By: Parrot
Installation of Electronic Box
The CK3100 system is fitted with 4 outputs:
-
Input-in-car radio output
-
LCD Screen
-
Power
-
Microphone
It is recommended to install all the cables before fixing the control box. Each cable supplied has a different connection to avoid wrong connections. The box must not be installed near the heating or the air-conditioning. Ensure that it it not exposed to sunlight. Avoid installing it behind metal walls, which could alter the quality of the Bluetooth link.
Installation of the In-Car Radio Cable
The mute cable is equipped with black ISO connectors and with a "line out" output.
In-Car Radio with <<Line In>> Inputs
Preferably use the type of connection by joining the brown and green wires as well as the yellow wires of the "mute" to the back of your in-car radio.
In-Car Radio with <<ISO>> Connectors
Disconnect the audio and supply bundles from the in-car radio and link the female connectors of the mute supply cables of the power supply cable to the in-car radio. Connect the audio and supply bundles from the vehicle to the male connectors. If the in-car radio is equipped with a mute input, connect the yellow wire of the mute cable to one of the "Mute In" inputs 1, 2, or 3.
If you have an in-car radio without <<ISO>> connectors, you must obtain an "ISO" adapter cable.
Installation of the Power Supply Cable
The red wire of the power cable must be connected to the permanent 12V, the orange wire to the 12V and the black wire to the earth. Verify the electric wiring of the ISO supply bundle of the in-car radio. In some vehicles it is necessary to reverse the positions of the red and orange wires. This operation is simply done by reversing the fuse holders. Do not connect the orange wire to the permanent 12V, otherwise you risk causing the vehicle battery to go flat.
Installation of the Microphone and Console
Microphone: The microphone must be aimed at the driver and can be installed anywhere on the vehicle/ on the LCD screen.
LCD Screen: Several accessories allow the screen to be installed in multiple sites in the body of the vehicle.
Fastening on the Dashboard: Using the scotch tape double face provided. Just stick the display on a plane and clean spot on the dashboard.
With a foot on the Dashboard: Once the display has been mounted on the foot provided in the packaging, stick this foot using the scotch tape double-face on the dashboard. From then on, the screen becomes directional.